Papers in Proceedings and monographs 2002
Bendsøe, M.P. and Sigmund, O.: Material Models in Topology Optimisation.
Lecture notes, Advanced School and Workshop on Bone Mechanics - Mathematical and Mechanical Models for
Analysis and Synthesis, 30 pp., Instituto Superior Tecnico, Lisbon, Portugal, June 24-28, 2002.
Kawamoto, A., Bendsøe, M P. and Sigmund, O.: Articulated Mechanism Design by an
Enumeration Approach.
Proc. 15th Nordic Seminar on Computational Mechanics (E. Lund, N. Olhoff, J. Stegmann, eds.)
17-19 October, 2002, Aalborg, Denmark. AAU, Denmark, pp. 59-62.
Hansen, L.V.: Constant Frequency Condition of Fiber Lasers in Strain.
In: Lund, E., Olhoff, N., Stegmann, J. (eds.), Proceedings of 15th Nordic Seminar on Computational Mechanics,
Aalborg, Denmark, October, pp. 185-188, 2002.
Jacobsen, T.K., Andersen, L.F., Sørensen, B.F., Jensen, H.M. and Hansen, P.F.:
Brudmekanisk karakterisering og design af limsamlinger.
Dansk Metallurgisk Selskabs Vintermøde, 61-73, (eds. P. Brøndsted & M. Somers), ISBN 87-97535-31-9, 2002.
Jensen, J.S., Sigmund, O., Thomsen, J.J.
and Bendsøe, M.P.: Design of Multi-phase Structures with Optimized Vibrational and Wave-transmitting
Properties.
In Proceedings of the 15th Nordic seminar on Computational Mechanics, 63-66, Aalborg, Denmark, E. Lund,
N. Olhoff and J. Stegmann (eds.), Institute of Mechanical Engineering, Aalborg University, 2002.
Legarth, B.N., Tvergaard, V. and Kuroda, M.: Crack-tip
Blunting in an Anisotropic Material with Plastic Spin.
WCCM V, Fifth World Congr. Comput. Mech. (eds. H.A. Mang et al.), ISBN 3-9501554-0-6, on Web, 9 p., 2002.
Niordson, C.F.: Nonlocal Plasticity Effects on Fracture Toughness.
In: Khan, K.S. & Lopez-Pamies, O. (eds.). Proceedings of Plasticity ’02: Plasticity, Damage and Fracture at
Micro and Nano Scales, Aruba, January 3-9 2002, Fulton, Maryland, USA, Neat Press, pp. 591-593.
Pedersen, C.B.W.: Revisiting Topology Optimization of Continuum Structures with Elastoplastic Response.
Proceedings of the 15th Nordic Seminar on Computational Mechanics, October 18-19, 2002, Aalborg,
Denmark, Editors: Lund, E., Stegmann J., and Olhoff N. Publisher: Institute of Mechanical Engineering,
Aalborg University, Denmark, 2002.
Pedersen, C.B.W.: Topology Optimization of Energy Absorbing Frames. Proceedings of the Fifth World
Congress on Computational Mechanics (WCCM V), July 7-12, 2002, Vienna, Austria. Eds. Mang, H.A.,
Rammerstorfer, F.G. and Eberhardsteiner, J.. Publisher: Vienna University of Technology, Austria, 2002.
Pedersen, C.B.W.: Topology Optimization for Crashworthiness of Frame Structures. ICrash 2002, 3rd
Int. Crashworthiness Cinference, Society of Automotive Engineering, Melbourne, Victoria, Australia,
2002.
Pedersen, N.L.: On Design of Probes for Biological Sensing. Proceedings of the 15th Nordic Seminar on
Computational Mechanics, (NSCM-15), Aalborg, 67-70, 2002.
Pedersen, P.: Sensitivity Analysis for Dynamics Stability Problems.
A.P. Seyranian & I. Elishakoff (eds.). Modern Problems of Structural Stability CISM, Italy Springer,
Courses and Lectures, Number 436, pages 285-340, 2002.
Pedersen, P.: On Design for Uniform Energy Density of Non-isotropic Continua.
E. Lund, N. Olhoff & J. Stegmann, 15th Nordic Seminar on Computational Mechanics, 2002, pp. 71-74.
Pedersen S.L., Hansen J.M. and Ambrosio, J.A.C.: A Novel
Roller-Chain Drive Model Using Multibody Dynamics Analysis Tools.
Virtual Nonlinear Multibody Dynamic Systems, NATO Advanced Study Institute, Prague, Czech Republic,
June 23 - July 3, 2002.
Redanz, Pia: Deformation Induced Anisotropy in Powder Compaction at High Relative
Densities.
In: Khan, A.S. and Lopez-Pamies, O. (eds.) Proceedings of Plasticity '02: Plasticity, Damage and Fracture
at Macro, Micro and Nano Scales, Aruba, January 3-9, Fulton, Maryland, USA, Neat Press, pp. 522-524, 2002.
Richelsen, Ann Bettina and van der Giessen, Erik: The Influence of Grain Shape on
Surface Roughnening in Sheet Drawing.
In: Khan, A.S. and Lopez-Pamies, O. (eds.) Plasticity, Damage and Fracture at Macro,
Micro and Nano Scales, Proceedings of Plasticity’02: The Ninth International Symposium on Plasticity and
Its Current Applications, Aruba, January 3-9, Neat Press, Fulton, Maryland, USA 2002, pp. 257-259.
Sigmund, O.: Material Design by Topology Optimisation.
In "Plasticity, Damage and Fracture at Macro, Micro and Nano Scales, Proceedings of Plasticity '02",
Aruba, 45-47, Kahn, A.S. and Lopez-Pamies, O. (eds.), Neat Press, Maryland, 2002 USA.
Sigmund, O. and Jensen, J.S.: Topology Optimization of Elastic
Band Gap Structures and Waveguides.
In H.A. Mang, F.G. Rammerstorfer and J. Eberhardsteiner, (eds.), Proceedings of the Fifth World Congress on
Computational Mechanics, http://wccm.tuwien.ac.at, Vienna University of Technology, Austria 2002.
Neves, M.M., Sigmund, O. and Bendsøe, M.P.: Topology Optimization of Periodic
Microstructures with a Buckling Criteria.
In H.A. Mang, F.G. Rammerstorfer and J. Eberhardsteiner, (eds.), Proceedings of the Fifth World Congress on
Computational Mechanics, http://wccm.tuwien.ac.at, Vienna University of Technology, Austria 2002.
Tvergaard, V. and Needleman, A.: 3D Charpy specimen analyses for welds.
From Charpy to Present Impact Testing (eds. D. Francois, et al.), ESIS Publication 40, Elsevier,
pp. 437-444, 2002.
Tvergaard, V. and Hutchinson, J.W.: Crack growth per cycle by blunting and void growth.
Fatigue 2002 (ed. A.F. Blom), Vol. 1/5, EMAS Publishing, U.K., pp. 107-116, 2002.
Tvergaard, V.: Numerical modelling in nonlinear fracture mechanics.
Fracture Mechanics Beyond 2000 (eds. A. Neimitz et al.), Vol. III/III, EMAS Publishing, U.K., pp. 477-484, 2002.
Papers in Proceedings and monographs 2001
Bendsøe, M.P., Neves, M.M. and Sigmund, O.: Optimal Topology Design of
Microstructures with a Constraint on Local Buckling Behaviour.
Proc. 14th Nordic Seminar on Computational Mechanics (Eds. L. Beldie, O. Dahlblom,
A. Olsson, N.S. Ottosen & G.Sandberg) Lund, 19-20 October, 2001, Lund, Sweden.
Structural Mechanics, LTH, Sweden, pp. 53-56.
Bruns, T.E. and Sigmund, O.: Topology Design of Bistable Mechanisms.
Proceedings of the Fourth World Congress of Structural and Multidisciplinary
Optimization, Dalian, China, 4-8 June 2001.
Buhl, T.: Optimization of Deployable Structures.
Proceedings of the Fourth World Congress of Structural and Multidisciplinary
Optimization, Dalian, China, 4-8 June 2001.
Buhl, T.: Optimization of Deployable Structures.
Proceedings 2nd Max Planck Workshop on Engineering Design Optimization, Nyborg,
Denmark, 12-14 October 2001.
D. de la Cour, D.: Identification and Optimization in Relation to Deep Drawing.
Proceedings 2nd Max Planck Workshop on Engineering Design Optimization,
Nyborg, 12-14 October, 2001, pp. 36-39.
D. de la Cour, D. and Pedersen, P.: Solving Frictional
Contact Problems using an Optimization Algorithm.
Proceedings of the Fourth World Congress of Structural and Multidisciplinary
Optimization, Dalian, China, 4-8 June, 2001.
Jensen, H.M.: Delamination of Coatings.
Handbook of Materials Behavior Models, (Ed. J. Lemaitre), Academic Press, pp. 582-586, 2001.
Jensen, H.M.: Free Edge and Interaction Effects on the Strength of Finite-sized
Interface Bonds.
Proceedings ICF-10 (Eds. K. Ravi-Chandar, et al.), 6 p., on CD,
Elsevier 2001.
Pedersen, C.B.W.: Topology Optimization of 2D-frames for Crashworthiness.
Proceedings of the Fourth World Congress of Structural and Multidisciplinary Optimization, Dalian, China,
4-8 June 2001.
Pedersen, C.B.W.: Topology Optimization with Respect to Dynamic Crushing.
Proceedings 2nd Max Planck Workshop on Engineering Design Optimization, Nyborg,
12-14 October, 2001.
Pedersen, N.L.: On Topology Optimization of Laminated Prestressed Plates using a
New Interpolation Function.
Proceedings of the Fourth World Congress of Structural and Multidisciplinary
Optimization, Dalian, China, 4-8 June 2001.
Pedersen, N.L. and Nielsen, A.K.: Truss Optimization with Constraints on
Eigenfrequencies, Displacements, Stresses and Buckling.
Proceedings of the 14th Nordic Seminar on Computational Mechanics, (NSCM - 14),
Lund, Sweden, pp. 177-180, 2001.
Pedersen, P.: Optimal Shape Design of a Hole in Front of a Crack.
Proceedings of the Fourth World Congress of Structural and Multidisciplinary
Optimization, Dalian, China, 4-8 June 2001.
Pedersen, P.: On Bone Mechanics, Modelling and Optimisation.
Proceedings of 15th AIMETA Congress, Taormina, 2001.
Pedersen, P.: Optimal Shape Design of Stress Releasing Holes.
Proceedings ICF-10 (Eds. K. Ravi-Chandar, et al.), on CD, Elsevier, 2001.
Pedersen, P.: On Crack Tip Stress Releasing.
Proceedings of the 14th Nordic Seminar on Computational Mechanics, (NSCM - 14), Lund, Sweden, pp. 204-207, 2001.
Pedersen, P.: Shape Design and Analysis using Simple Hole Modelling.
Proceedings 2nd Max Planck Workshop on Engineering Design Optimization, Nyborg, 12-14 October, 2001, pp. 58-60.
Pedersen, P.: Six lectures on Sensitivity Analysis for Dynamic Stability Problems.
Stability of Structures: Modern Problems and Unconventional Solutions, Udine, Italy, 59 p., 2001.
Ambrósio, J.A.C., Pedersen, S.L. and Hansen, J.M.: A Contact
Model for the Roller and Sprocket Engagement in Roller-Chain Drives.
Proceedings of the ECCM-2001, Cracow, Poland, June 26-29, 2001.
Redanz, P. and McMeeking, R.M.: Sintering and Coarsening of Spherical
Particles - a Micromechanical Approach.
Proceedings of the 4th International ESAFORM Conference on Material Forming (Ed. A.M. Habraken), Liege,
Belgium 23-25 April 2001, pp. 749-752.
Redanz, P.: On Constitutive Models for Powder Compaction at High Relative Densities.
San Diego, California, USA, 26-29 June 2001.
Richelsen, A.B. and van der Giessen, E.: Size Effects in Sheet Drawing.
Sheet Metal 2001, Proceedings of the 9th International Conference (Eds. J.R. Duflou, M. Geiger, H.J.J. Kals,
B. Shirvani and U.P. Singh), Mechanical Engineering Department, Katholieke Universiteit Leuven, Belgium,
2001, pp. 263-270.
Sigmund, O.: Optimum Design of MicroElectroMechanical Systems.
In: Mechanics for A New Millennium (Eds. H. Aref & J.W. Philips),
pp. 505-520, Netherlands, 2001. IUTAM, Kluwer Academic Publishers.
Sigmund, O.: Recent Developments in Extremal Material Design.
In: Trends in Computational Mechanics (Eds. W.A. Wall, K.-U. Bletzinger & K. Schweizerhof), pp. 228-232.
CIMNE, 2001.
Sigmund, O.: Microstructural Design of Elastic Band Gap Structures.
Proceedings of the Fourth World Congress of Structural and Multidisciplinary
Optimization, Dalian, China, 4-8 June 2001.
Neves, M.M., Sigmund, O. and Bendsøe, M.P.: Topology Optimization of
Periodic Materials with Buckling Constraint.
Proceedings of the 2nd Max Planck Workshop on Engineering Design Optimization, Hotel Nyborg Strand, Nyborg,
Denmark, October 12-14, 2001. Department of Mathematics, Technical University of Denmark, DK-2800 Lyngby,
pp. 40-43.
Lieneman, J., Greiner, A., Korvink J.G. and Sigmund, O.: Optimization
of Integrated Magnetic Field Sensors.
In MSM2001, 2001.
Sigmund, O.: Topology Optimization Methods with Applications in Mechanism,
MEMS and Material Design.
Department of Mechanical Engineering, Technical University of Denmark, DK-2800 Lyngby, Denmark, 2001.
Tvergaard, V.: Effect of T-stress and Void Nucleation on Cohesive Zone
Model Predictions for Ductile Fracture.
Proceedings ICF-10 (Eds. K. Ravi-Chandar, et al.), 5 pages, on CD, Elsevier, 2001.
Tvergaard, V.: Damage Evolution in Metal Matrix Composites.
Proceedings ICCE/8 (Ed. D. Hui), New Orleans, 2001, pp. B51-B54.
Tvergaard, V. and Needleman, A.: Modified Gurson Model.
In Handbook of Materials Behavior Models (Ed. J. Lemaitre), Academic Press 2001, pp. 430-435.
Benzerga, A.A., Batisse, R., Needleman, A. and Tvergaard, V.:
Analyses of Size Effects in the Charpy V-notch Test.
Proceedings ICF-10 (Eds. K. Ravi-Chandar, et al.), 6 pages, on CD,
Elsevier, 2001.
Papers in Proceedings and monographs 2000
Bendsøe, M.P., Neves, M.M. and Sigmund, O.: Recent Results on Topology
Optimization of Periodic Composites.
In Topology Optimization of Structures and Composite Continua, eds. G.I.N. Rozvany
and N. Olhoff. Kluwer Academic Publishers, Dordrecht, pp. 3-17, 2000.
Neves, M.M., Bendsøe, M.P. and Sigmund, O.:
A Buckling Performance Index for
Topology Design of Periodic Microstructures.
Proceedings of the ECCOMAS 2000, Barcelona, 11-14 September, 2000.
Buhl, T., Pedersen, C.B.W.
and Sigmund, O.: Designing Geometrically Non-linear
Structures using Topology Optimization.
In 3rd WCSMO, Niagara Falls, May, 2000.
Jensen, H.M.: Fracture and Strain Localisation
in Layered Materials and Fibre
Composites.
Thesis for dr.techn., 274 pp., Lyngby, 2000.
Pedersen, N.L.: On Optimization of Laminated Plates with Prestress: Using Topology
Optimization.
In Proceedings of the 13th Nordic Seminar on Computational Mechanics (NSCM - 13),
2000, pp. 179-182.
Pedersen, N.L.: On Design of a Backplate Used in a Hearing Aid.
Technical Proceedings of the Third International Conference on Modeling and
Simulation of Microsystems (MSM 2000), pp. 624-627.
Pedersen, P.: Material Optimization.>br>
In 33rd Solid Mechanics Conference. ATOS, Polish Academy of Sciences, pp. 51-52,
September, 2000.
Pedersen, P.: Optimal Design with Non-linear Elastic Materials.
In Topology Optimization of Structures and Composite Continua, eds.
G.I.N. Rozvany and N. Olhoff. Kluwer Academic Publishers, NATO Science Series,
vol. 7, pp. 307-316, May, 2000.
Sigmund, O.: Systematic Design of Mechanical Systems
using Topology Optimization.
Proceedings of the 2nd ASMO/ISSMO Conference on Engineering Design
Optimization, Swansea, UK, pp. 5-13, 2000.
Sigmund, O.: Systematic Design of Micro and Macro
Systems.
In Symposium on Deployable Structures: Theory and Applications, ed.
S. Pellegrino,
Cambridge, UK, 1998. IUTAM, pp. 373-382, 2000.
Sigmund, O.: Systematic Design and Optimization of
Multi-material, Multi-degree-of-freedom Micro Actuators.
Proceedings of Modelling and Simulation of Microsystems, Semiconductors,
Sensors
and Actuators, MSM2000, San Diego, California, pp. 36-99, 2000.
Sigmund, O.: Topology Optimization of Multi-material,
Multi-physics Structures.
In Proceedings of the 3rd WCSMO99, Niagara Falls, May, 2000.
Sigmund, O., Buhl, T. and
Pedersen, C.B.W.: On the Influence of Geometrical
Non-linearities in Topology Optimization.
Proceedings of NATO ARW: Topology Optimization of Structures and Composite
Continua, Budapest, Hungary, Kluwer, pp. 61-73, 2000.
Thomsen, J.J.:
Vibration-induced Displacement Using High-frequency Resonators and
Friction Layers.
In IUTAM/IFToMM Symposium on Synthesis of Nonlinear Dynamical Systems, Riga,
August, 1998, eds. E. Lavendelis and M. Zakrzhevsky; Kluwer series: Solid Mechanics
and Its Applications, Kluwer, Dordrecht, vol. 37, pp. 237-246, 2000.
Tvergaard, V. and Pedersen, T.Ø.:
Applications of Damage Mechanics under Cyclic
Loading.
In Continuous Damage and Fracture, ed. A. Benallal, Elsevier, Paris, pp. 273-280,
2000.
Kuwabara, T., Kuroda, M., Tvergaard, V. and
Nomura, K.: Measurement of
Subsequent Yield Surface of Prestrained Sheet Metal: Application of Abrupt
Strain Path Change Method.
In Plastic and Viscoplastic Response of Materials and Metal Forming, eds.
A.S. Khan et al., Neat Press, pp. 531-533, 2000.
Papers in Proceedings and monographs 1999
Buhl, T., Pedersen, C.B.W. and
Sigmund, O.: Topology Synthesis of Large-Displacement
Compliant Mechanisms.
Proceedings of 1999 ASME-DETC, Las Vegas, 1999, DETC99/DAC-8554.
Buhl, T., Pedersen, C.B.W. and
Sigmund, O.: Designing Geometrically Non-linear
Structures using Topology Optimization.
Proceedings of 3rd WCSMO, Niagara Fall, 1999.
Ambrosio, Jorge A.C. and Hansen, John M.: Roller-Chain
Drives Mechanics using Multibody Dynamics Tools.
Proceedings of the XII-th Nordic Seminar on Computational Mechanics, Helsinki,
Finland, 1999, pp. 47-50.
Jensen, H.M.: A Fracture Mechanics Analysis of Adhesive
Bond Failure.
Proceedings of the 1999 ASME Applied Mechanics and Materials Conference,
Blacksburg, 1999.
Jensen, H.M.: Compressive Failure Modes in Layered
Materials.
Book of Abstracts for the 36th Society of Engineering Science Meeting, Austin,
USA, 1999.
Pedersen, C.B.W., Buhl, T. and
Sigmund, O.: Topology Synthesis of Large-Displacement
Compliant Mechanisms.
Proceedings of 1999 ASME-DETC, Las Vegas, USA, 1999, pp DETC99/DAC-8554.
Pedersen, N.L.: Optimization of Cantilever Probes for
Atomic Force Microscopy.
Design, Test and Microfrabrication of MEMS and MOEMS, DTM-99, Paris, France,
1999, pp. 131-140.
Pedersen, N.L.: Topology Optimization of Backplates
with Prestress: Application for Microphones.
Proceedings of The Twelfth Nordic Seminar on Computational Mechanics,
Helsinki, Finland, 1999, pp, 69-72.
Pedersen, N.L.: Topology Optimization of AFM Probes
with Constraints on Eigenvalues.
Short Paper Proceedings 3rd WCSMO, Buffalo, USA, 1999, pp. 623-625.
Pedersen, P.: Minimum Stress Concentration in
Anisotropic and Non-Linear Solids.
Proceedings 3rd WCSMO, Buffalo, USA, 1999, pp. 558-560.
Pedersen, P.: Identification Techniques in Composite
Laminates.
Proceedings ASI on Mechanics of Composite Materials and Structures
(eds. M. Soares, M. Soares and Freitas), Troia, Portugal, 1999, pp. 443-452.
Pedersen, P.: Sensitivity Analysis and Inverse Problems
for Laminates and Materials.
Proceedings ASI on Mechanics of Composite Materials and Structures
(eds. M. Soares, M. Soares and Freitas), Troia, Portugal, 1999, pp. 453-463.
Pedersen, P.: On Sensitivities of Optimal Shapes.
Proceedings of the Twelfth Nordic Seminar on Computational Mechanics,
Helsinki, Finland, 1999, pp. 27-30.
Pedersen, P., Seyranian, A.P. and Solem, F.:
Sensitivity Analysis with the Floquet Method.
Proceedings Vibration, Noise and Structural Dynamics '99, Venice, Italy,
1999, pp. 528-537.
Pedersen, P. and Tortorelli, D.A.: Similarities in
Bone Remodelling and Damage Evolution.
Proceedings IUTAM Symposium on Synthesis in Bio Solid Mechanics
(eds. M.P. Bendsøe and P. Pedersen), Lyngby, Denmark, 1999, pp. 387-400.
Pedersen, P. and Bendsøe, M.P. (eds): IUTAM Symposium
on Synthesis in Bio Solid Mechanics.
Proceedings of the IUTAM Symposium held in Copenhagen, Denmark, Kluwer
Academic Publishers, 1999, 410 pp.
Grønbæk, J., Birker, Torben and Pedersen, T.Ø.: Optimisation of Life
Performance and Net-shape Capability of Cold-forging Tools through
Minimisation of Micro-plastic Phenomena.
Proceedings of the 6th International Conference on Technology of Plasticity
(ed. M. Geiger), Nuremberg, Germany, 1999, Vol. 1, pp. 243-252.
Poulsen, T.A.: Multi-scale Representations in Design
Optimization.
3rd WCSMO Short Paper Proceedings, Buffalo, USA, 1999, pp. 129-131.
Redanz, P. and Fleck, N.A.: Discrete Element Modelling
of Powder Compaction.
Proceedings of IUTAM Symposium on Theoretical and Numerical Methods in
Continuum Mechanics of Porous Materials, Stuttgart, Germany, 1999, pp. 1-6.
Richelsen, Ann Bettina: Cold Rolling of Plates -
Analyses of Symmetric and Asymmetric Rolling.
Metallurgiske Processer til Design af Structurer og Egenskaber. Dansk
Metallurgisk Selskabs Vintermøde, Horsens, Denmark, 1999, pp. 257-266.
Sigmund, O.: On the Optimality of Bone
Microstructure.
In Synthesis in Bio Solid Mechanics (eds. P. Pedersen and M.P. Bendsøe),
IUTAM, Kluwer, 1999, pp. 221-234.
Sigmund, O.: Topology Synthesis of Two-Material
Compliant Actuators.
Proceedings of 1999 ASME-DETC, Las Vegas, 1999, DETC))/DAC-8553.
Sigmund, O.: Topology Optimization of Multi-material,
Multi-physics Structures.
Proceedings 3rd WCSMO, Niagara Falls, USA, 1999.
Jonsman, J., Sigmund, O. and Bouwstra, S.: Compliant
Electrothermal Microactuators.
Proceedings of MEMS'99, 1999, pp. 588-593.
Jonsman, J., Sigmund, O. and Bouwstra, S.: Multi Degrees
of Freedom Electro-thermal Microactuators.
Proceedings of TRANSDUCERS'99, 1999, pp. 1372-1375.
Tvergaard, V. and Pedersen, T.Ø.: Fatigue Damage
Development in a Steel based MMC.
Proceedings 3rd National Congr. Comput. Mech. (eds. N. Aravas et al.),
Univ. of Thessaly, Greece, 1999, pp. 101-108.
Papers in Proceedings and monographs 1998
Bagge, M.: Bone Adaptation Around Orthopeadic Implants of Varying
Materials.
Proceedings NSCM-11: Nordic Seminar on Computational
Mechanics, October 16-17, Stockholm, Sweden, pp. 9-12, 1998.
Bagge, M.: Three-Dimensional Bone Adaptation of the Proximal Femur.
Proceedings NATO Advanced Study Institute on Mechanics of
Composite Materials and Structures, July 12-24, Tróia, Portugal,
NATO-ASI Vol. IV, pp. 355-372, 1998.
Bagge, M.: Time Simulation of Bone Adaptation.
Proceedings IUTAM-Symposium: Synthesis in Bio Solid Mechanics,
May 24-27, Lyngby, Denmark, 1998.
Bendsøe, M. P. and Sigmund, O.: Optimering af
Konstruktioneres Topologi, Form og Materiale, i Forskning, Konstruktioner og
Eksperiment (in Danish).
Katalog til udstillingen: Konstruktiones Paradoks, Kunstakademiets
Arkitektskole, Holmen, 2.-27. september, pp. 16-19, 1998.
Pedersen, O.B., Carstensen, J.V. and Rasmussen, T.: Modelling Metal Fatigue
at Micron- and Nanoscales.
Proceedings 19th Risø International Symposium on Materials Science:
Modelling of Structure and Mechanics of Materials from Microscale to
Product (eds. J.V. Carstensen, T. Leffers, T. Lorentzen, O.B. Pedersen,
B.F. Sørensen and G. Winther), Risø National Laboratory, Roskilde,
Denmark, pp. 109-132, 1998.
Hammer, V. B., Pedersen, P., Bendsøe, M.P. and
Diaz, A.R.: On Optimization, Damage, and Design.
Proceedings 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis
and Optimization, St. Louis, MI, Sept. 2-4, pp. 1458-1468, 1998.
Jensen, Henrik M.: Adhesive Strength.
In Mechanical Behaviour of PVD coatings (eds. H. Oettel, S. Hogmark and
J.V. Stebut), pp. 157-167, 1998.
Pedersen, N.L.: Shape Optimizing of a Sleeping
Policeman.
Trafikdage på Aalborg Universitet, Transportrådet,
Trafikforskningsgruppen Aalborg Universitet, Aalborg, Denmark,
pp. 549-557, 1998.
Pedersen, N.L.: Optimization of Response
Characteristics for Multibody Systems Structural Optimization.
Proceedings of the Australasian Conference on Structural Optimization,
Oxbridge Press, Victoria, Australia, pp. 223-230, 1998.
Pedersen, P.: Optimal Design with Non-Linear
Elasticity and Damage Evolution.
Proceedings ASCO'98, Sydney, Australia, pp. 317-324, 1998.
Pedersen, P.: Sensitivity Analysis and Inverse
Problems for Laminates and Materials.
Proceedings ASI on Mechanics of Composite Materials and Structures
(eds. Mota Soares, Mota Soares and Freitas), Troia, Portugal, Vol. II,
pp. 153-163, 1998.
Pedersen, P.: Identification Techniques in Composite
Laminates.
Proceedings ASI on Mechanics of Composite Materials and Structures
(eds. Mota Soares, Mota Soares and Freitas), Troia, Portugal, Vol. II,
pp. 165-174, 1998.
Pedersen, P.: Influence from Non-Linearities on
Optimal Shape Design.
Proceedings 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary
Analysis and Optimization, St. Louis, USA, AIAA-98-4853, pp. 1123-1130, 1998.
Pedersen, P., Mortensen, Sune A. and Larsen, Dennis G.:
A Procedure for Contact Problems used in Hardness Test Analysis.
Proceedings NSCM-11 on Computational Mechanics, Stockholm, Sweden, 1998.
Tortorelli, Daniel A. and Pedersen, P.: Similarities in
Bone Remodelling and Damage Evolution.
Proceedings IUTAM Symposium on Synthesis in Bio Solid Mechanics (eds.
M.P. Bendsøe and P. Pedersen), Lyngby, Denmark, 1998.
Redanz, Pia: The Role of Inter-Particle Cohesive
Strength in the Powder Compaction of a Cup.
Proceedings of Symposium C, AIChE, Miami, USA, pp. 1-6, 1998.
Richelsen, A.B.: Numerical Modelling of Cold Rolling
of Coarse-Grained Aluminium AA1050.
11th Nordic Seminar on Computational Mechanics, KTH Royal Institute of
Technology, Stockholm, pp. 43-46, 1998.
Sigmund, O.: Systematic Design of Micro Actuators
using Topology Optimization.
Proceedings of SPIE, Smart Materials Tecnology, March 2 - 6, San Diego,
California, SPIE, Vol. 3328, pp. 23-31, 1998.
Sigmund, O.: Systematic Design of Electrothermomechanical
Microactuators using Topology Optimization.
Proceedings of Modelling and Simulation of Microsystems, Semiconductors,
Sensors and Actuators, MSM98, Santa Clara, California, pp. 350-355, 1998.
Sigmund, O.: Topology Optimization in Multiphysics
Problems.
In 7th Symposium in Multidisciplinary Analysis and Optimization,
AIAA/USAF/NASA/ISSMO, AIAA-98-4905, pp. 1492-1500, 1998.
Sigmund, O., Torquato, S., Gibiansky, L.V. and
Aksay, I.A.: On the Design of Hydrophones made as 1-3 Piezoelectrics.
Proceedings IUTAM Symposium on Transformation Problems in Composite and
Active Materials, Cairo, March 1997 (eds. Y.A. Bahei-El-Din and G.J. Dvorak),
Kluwer, pp. 147-160, 1998.
Sigmund, O. and Torquato, S.: Design of Materials
with Extreme Elastic or Thermoelastic Properties using Topology
Optimization.
Proceedings IUTAM Symposium on Transformation Problems in Composite and
Active Materials, Cairo, March 1997 (eds. Y.A. Bahei-El-Din and G.J. Dvorak),
Kluwer, pp. 233-246, 1998.
Duysinx, P. and Sigmund, O.: New Developments in
Handling Optimal Stress Constraints in Optimal Material Distributions.
In 7th Symposium in Multidisciplinary Analysis and Optimization,
AIAA/USAF/NASA/ISSMO, AIAA-98-4906, pp. 1501-1509, 1998.
Thomsen, J.J.: Vibration-Induced Displacement using
High-Frequency Resonators and Friction Layers.
Proceedings IUTAM/IFToMM Symposium on Synthesis of Nonlinear Dynamical
Systems-SNDS '98, 24-28 Sept., Riga, Latvia. Klüwer Academic Press, 10 pp.,
1998.
Tvergaard, V.: Fibre Spacing Effects in 3D Analyses
of Metal Matrix Composites.
In Modelling of Structure and Mechanics of Materials from Microscale to
Product (eds. J.V. Carstensen et al.), Risø, Denmark, pp. 523-528, 1998.
Tvergaard, V. and Needleman, A.: Nonlocal Damage
Effects on Plastic Flow Localization under Dynamic Loading.
In Material Instabilities in Solids (eds. R. de Borst and E. van der Giessen),
John Wiley & Sons, New York, pp. 457-471, 1998.
Papers in Proceedings and monographs 1997
Bagge, Mette: A Bone Remodelling Scheme from Optimality Criteria.
Proceedings of 10th Nordic Seminar on Computational Mechanics, Tallinn,
pp. 192-195, 1997.
Carstensen, Jesper V. and Pedersen, O.B.: Damage in Low Cycle Fatigue of
Brass.
Proceedings of the 6th International Symposium on Plasticity and Its Current
Applications, (ed. A.S. Khan), Juneau, Alaska, July 14-18, 1997. 187 pages.
Christensen, Claus Dencker, Byskov, Esben and
Christoffersen, Jes: An Inexpensive FEM Model of Kinkbands.
In Stability of Structures VIIIth Symposium (eds. M. Kotelko, A. Zeligowski
and Z. Galwa), Department of Strength of Materials & Structures, Technical
University of Lodz, September 22-26, 1997. Pages 43-48.
Hammer, V.B., Bendsøe, M.P., Lipton, R. and
Pedersen, P.: Minimum Compliance Design of Laminated Plates.
Proceedings of Int. Conference on Homogenization and Applications to Material
Sciences (eds. D. Cioranescu, A. Damlamian and P. Donato), Nice, Frankrig,
June 6-10, 1995. GAKUTO Int. Series in Math. Sci. Appl., Vol. 9, Gakkotosho,
Tokyo, pp. 45-56, 1997.
Hansen, John M. and Ravn, Peter: Distributed Computing
Applied to Sensitivity Analysis of Mechanical Systems.
Proceedings of 10th Nordic Seminar on Computational Mechanics, Tallinn, pp.
171-174, 1997.
Jensen, H. Myhre: Identation Cracking of Brittle
Coatings.
Proceedings of the Ninth International Conference on Fracture, Sydney,
April 1-5, 1997. 8 pages.
Jensen, H. Myhre: Adhesive Strength.
Proceedings of the Workshop "Mechanical Properties of Hard Coatings",
Freiberg, October 13-17, 1997. 11 pages.
Jensen, H. Myhre: Fracture Mechanicsm Maps for Coated
Materials.
Proceedings of Nordic Ceramics '97, Roskilde, pp. 54-55, 1997.
Mikkelsen, Lars P.: 2D Nonlocal Approach to the Post-Necking Behaviour.
In Computational Plasticity, Fundamentals and Applications (eds. D.R.J. Owen,
E. Onate and E. Hinton), CIMNE, Barcelona, pp. 696-701, 1997.
Mikkelsen, Lars P.: Necking of Stretched Sheets Modelled by a 2-D Nonlocal
Plasticity model.
To appear in Proceedings of the 2nd Euroconference and Int. Symposium
Material Instabilities in Deformation and Fracture, Aristotle University of
Thessaloniki, Greece, 1997.
Pedersen, Niels L.: Optimization of the Response
Characteristics of a Speed Bump.
Proceedings of 10th Nordic Seminar on Computational Mechanics, Tallinn,
pp. 184-187, 1997.
Pedersen, Pauli: Recent Developments of Optimization
Formulations for Microstructural based Material Systems.
Proceedings of 4th National Congress on Theoretical & Applied Mechanics,
Leuven, pp. 1-6, 1997.
Pedersen, Pauli: Extension of Analytical Optimal
Design Results to Anisotropic, Non-linear Materials.
Proceedings of Second World Congress of Structural and Multidisciplinary
Optimization (eds. W. Gutkowski and Z. Mroz), Inst. of Fundamental
Technological Research, Warsaw, pp 217-218, 1997.
Pedersen, Thomas Ø: On Local Damage Development in Cold-Forging
Tools.
Transactions of the 14th International Conference on Structural Mechanics in
Reactor Technology (SMIRT 14), Lyon, pp. 121-128, 1997.
Redanz, Pia: Numerical Modelling of Powder
Compaction.
Proceedings of 10th Nordic Seminar on Computational Mechanics, Tallinn,
pp. 264-267, 1997.
Richelsen, Ann Bettina: Numerical Analysis of
Sandwich Plate Rolling.
Book of Abstracts 3rd EUROMECH Solid Mechanics Conference, Stockholm, Sweden,
18-22 August, 1997. 127 pages.
Sigmund, Ole: Design of Thermoelectric Actuators
using Topology Optimization.
Proceedings of Second World Congress of Structural and Multidisciplinary
Optimization (eds. W. Gutkowski and Z. Mroz), Inst. of Fundamental
Technological Research, Warsaw, pp 393-398, 1997.
Sigmund, Ole and Torquato, S.: Design of Materials
with Extreme Thermal Expansion using a Three-Phase Topology Optimization
Method.
SPIE, Smart Materials Technology, San Diego, USA, 1997.
Tvergaard, Viggo: Relations Between Crack Growth
Resistance and Fracture Process Parameters under Large Scale Yielding.
In Nonlinear Analysis of Fracture (ed. J.R. Willis), Kluwer Academic
Publishers, London, pp. 93-104, 1997.
Tvergaard, Viggo: Analysis of Debonding in Metal
Ceramic Systems.
In Advances in Fracture Research (eds B.L. Karihaloo et al.), Pergamon Press,
pp. 651-662, 1997.
Tvergaard, Viggo: Nonlocal Effects in Ductile
Fracture Predictions.
The Minerals, Metals & Materials Society Recent Advances in Fracture (eds.
R.K. Mahidhara et al.), pp.113-124, 1997.
Bay, N., Wanheim, T., Hattel, J.H., Tvergaard, V.,
Danckert, J., Jensen, D.J. and Hansen, N.: MM97.81.
Proceedings of MP2M Seminar. Foredragsmateriale. MP2M Seminar Lyngby,
Denmark, pp. 1-180, 1997.
Vestergaard, Rune: Calculation of Catalyst Bed Behaviour for Reactor Design.
Complas V, Fifth International Conference on Computational Plasticity,
Fundamentals and Applications, Barcelona, pp. 2005-2010, 1997.
